The Series 616KD Differential Pressure Transmitters with One-Touch® Digital Push- Button Calibration Technology are designed for simplicity, making them the ideal choice for installers and maintenance professionals. These instruments not only alleviate cumbersome turn pots typically found in most transmitters, but eliminate entirely the need to span the instruments during calibration. With a single digital push button, both ZERO AND SPAN are calibrated properly, nothing else is required. No additional reference pressure sources or separate calibration devices are necessary.

Series DPG Digital Pressure Gage
+/-0.25% or +/-0.5% F.S. Accuracy, NEMA 4X (IP66) Aluminum Housing

Replace your outdated analog gages with the new Series DPG Digital Pressure Gage. The SeriesDPG has a high ±0.25% or ±0.5% full scale accuracy. The 4 digit digital display will reduce the potential for errors in readings by eliminating parallax error commonly produced with analog gages.

Series DPG is battery powered and has an auto-shut off to conserve battery life. Battery life, on average, will last 2000 hours. A 4 button key pad allows easy access to features without the need to work through complex menus or difficult key combinations. These features include backlight, peak and valley, tare or auto zero and conversion of the pressure units.

PS1016/PS1016T Pressure Indicator

Features:
-Automatic zero
-Automatic calibration
-Panel key lock
-85 ~ 265 VAC or 24 VDC
-Two configurable alarms High/Low/Off
-RS485 communication supported
-Retransmission of variable process values 4 ~ 20mA, 0 ~ 10 mA, 0 ~ 20mA, 0 ~ 10V, 0 ~ 5V, 1 ~ 5V
-Thermocouple type J, E, K or Pt100 inputs option
-Dimension 96 x 96mm, 48W x 96mmH, 48W x 48mm

- DYNISCO MODEL PT462E -
The Classic Flexible Stem Melt Pressure Transducer

Description
Model PT462E has an 18" flexible stem between its rigid stem and the electronics housing to increase thermal isolation. It is the ideal choice for
applications requiring good repeatability, accuracy and economy, and is widely accepted by OEMs throughout the world.

-Features-
>> Universal Input
>> 2 Alarm Outputs
>> Retransmission
>> Min/max Value Hold
>> Modbus Communications
>> Transmitter Power supply
-Description-
The 1490 is a Universal Input Indicator with single or dual
configurable alarms, optional linear retransmission of Process
Variable, Transmitter power supply option as well as optional
Modbus communications.

Select the SERIES 2000 Magnehelic® Gage for high accuracy--guaranteed within 2% of full scale--and for the wide choice of 81 models available to suit your needs precisely. Using Dwyer's simple, frictionless Magnehelic® gage movement, it quickly indicates low air or non-corrosive gas pressures--either positive, negative (vacuum) or differential. The design resists shock, vibration and over-pressures.